Skip to main content

Working in the field



The anchorage, although we stopped here for all the wrong reasons, has turned out to be a really nice one. Of course with 5-10 knot winds you can anchor almost anywhere and be comfortable, but fate has decided to float us here where there's not another boat in site except for those travelling down the ICW. As usual, the only waves are coming from the big powerboats. Star made a great Cornish Game Hen dinner last night and we tried to take our minds off of our engine issues, saving them until this morning.



Up with the sun bright and early I started work on the coolant leak, working here in field conditions with Star yelling down to me whenever a big wake is approaching. The fitting is on the exhaust manifold after the waterpump, and the only way to remove and work on it is to loosen the alternator, remove the alternator/water pump belt, unbolt the water pump and starter, and pull the pump out. I did this, and found that the little rubber bushing had folded back. I set it straight, realigned the tube, and put everything back together. Filled the coolant back up with the last of my anti-freeze, and had no leaks. Started the engine, still no leaks, until it got warm and I revved it up to 1500 rpm, then I had a drip from the same spot every 7 seconds. That's about 9 drops a minute too many, so now I'm waiting for the engine to cool back down and I'll give it another go. This time I think I'll try a little of the 'waterpump and thermostat housing rtv silicone gasket' that I have onboard, and see if that will help. I'm starting to wonder if the pressure relief in my coolant reservoir cap is not working, and maybe I'm building up too much pressure. I had just rented a coolant pressure tester two weeks ago and it held pressure at 10# for an hour. The cap is labeled with a metric pressure that converts to 7.5#, so I'm a little surprised to be having the problems. Oh well, back to it.....

Update 1:15 PM- Took it all back apart, this time completely removing the water pump and coolant lines, put new rubber bushings on and sealed the problem section with a little of the gasket material. Tested with engine out of gear, warm, at 1800 rpm with no leaks!! Current plan is to take off tomorrow morning while the tide is with us and head north to Ft. Pierce and anchor between the bridges by Taylor Creek and Harbortown Marina.

Comments

  1. AnonymousApril 25, 2009 at 1:08 PM

    Like your blog, remember us? Herb and Laura, are guys doing the spring fling, how's the engine doing. Where did you cruise to?
    I started a blog about the same time, try this........ http://travelswithherblaura.blogspot.com/

    Oh yeh, we will crew for for almost nothing, you could probably get us to pay you. Have Fun!

    Herb

    ReplyDelete
  2. AnonymousApril 26, 2009 at 9:50 AM

    Hey Andy, Hey Star, This is Clyde. Reading your blog and happy to see the coolant leak appears to be taken care of! Good work!

    ReplyDelete
  3. AndyApril 26, 2009 at 3:16 PM

    You need a MM to help you with the engine. Great work on the blogging and good luck with the voyage.

    ReplyDelete

Post a Comment

Hope you enjoy the blog, please feel free to leave comments!

Popular posts from this blog

The Adventure always continues...

This is the Blog of the Sailing Vessel Felix. Felix has been sold, so I probably won't update the blog much more, just leave it here for posterity and start another one. This blog was primarily the record of our trip from North Lake Worth, Florida up to the Chesapeake Bay and our summer there before moving back to Florida. Because Blogger won't let me rearrange the posts into chronological order, it has to be this 'latest post first' format, here is the link to the beginning of the journey . You'll just have to select the posts by month and read in reverse order. I hope you enjoy, and I'll post up the new blog here whenever and wherever it begins. Thanks
2 comments
Read more

Chief of the Boat

"Heaven goes by favor; if it went by merit, you would stay out and your dog would go in." Mark Twain We long for an affection altogether ignorant of our faults. Heaven has accorded this to us in the uncritical canine attachment. ~George Eliot Dogs' lives are too short. Their only fault, really. ~Agnes Sligh Turnbull I talk to him when I'm lonesome like; and I'm sure he understands. When he looks at me so attentively, and gently licks my hands; then he rubs his nose on my tailored clothes, but I never say naught thereat. For the good Lord knows I can buy more clothes, but never a friend like that. ~W. Dayton Wedgefarth Chief 12/12/95 - 5/8/2010 Rest in peace, little buddy
4 comments
Read more

The Ultimate Garage Vacuum

"When your dreams turn to dust, vacuum." Sail Felix is really starting to branch out now. Not a lot of sailing going on these days, and since the blog has become more 'the life of Star and Andy' I'll use the chance to promote the GarageVac , since that's what I'm doing these days. I'm working to help promote the website, so if you missed clicking on that link, here it is again!! :-) The GarageVac is a powerful yet compact central vacuum system for your home, workshop, or garage. That's not just marketing bs, it really is a strong vacuum, and it comes with an 8' hose that stretches out to 40' to reach anywhere in the garage, into the home, and out of the garage into the driveway. It uses Hepa filters to keep the dust from coming back into the home, and because of the slim, low profile design (It's only 4" deep!) it can be flush mounted into a 2x4 studded wall. The best part? It's manufactured right here in Palm City, Florida. ...
Post a Comment
Read more